1511-56" shuttle loom and textile equipment 4x1Multi shuttle
box,B15X refers to the1511loomwarp coil; part number 3434 refers to the 1515loomwarp coil, code 4102 refers GA615 typeloomwarp coil.
1511M type automatic loom
First, purpose and scope of use
Type 1511m loom is mainly used for plain weave weaving cotton and
blended fabrics, including adding various twill or dobby dobby
device, can be woven twill or organization more complex fabric.
Two, technical characteristics
1, under the condition of no parking signs automatic shuttle
2. Hand to the left and right. (left hand to open the machine for
the left hand car).
3, wear reed width of 105 cm (nominal reed 44 inches) and 110 cm
(reed nominal amplitude 46 inches), 120 cm (reed nominal amplitude
50 inches), 125 cm (nominal reed width 52 inches).
4, Qu Bingzhou (bending axis) speed 180~220 turn / points (105~110
cm), 170~210 to turn / points (120-125 cm).
5, the most wide beam disc space 1074mm (44 inches loom), 1125mm
(46 inch loom), 1226mm (50 inch loom), 1277mm (52 inches loom).
6, full cloth roller diameter 222mm
7, motor speed 960 rpm.
8, motor FO53-6 type, power 0.8 kilowatts (weaving machine motor
with 0.8KW majority)
9, machine shape size is wide: 2336mm (44), 2387mm (46 inch),
2488mm (50 inch), 2539mm (52 Inch); deep: 1428mm; high: 1295mm.
10, machine weight of about 830KG (44 inch), 840KG (46 inch), 860KG
(50 inch), 880KG (52 Inch). (not including motor, plain tappet
11, transmission mode of single motor drive belt transmission.
12, send the organization of the type of semi positive and semi
negative automatically sent by.
13, breaking through the menopause menopause type mechanical
14, the opening mechanism of the type of the inside of the disc on
15, the type of the shuttle mechanism.
16, beating mechanism type crank connecting rod type.
17, the warp tour reed type protection device.
18, the volume of the type of mechanism type seven gear
19, weft stop device type weft cam control type side fork.
Automatic shuttle changing type, 20 weft supply device.